Aluminium section and Extrusion

Aluminium

Please Click on an Image to Enlarge

A14 - 'J' Gutter		A15 - 'J' Gutter
Sizes - 19 x 9mm (O/a) Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 22 x 11mm (O/a) Length - 2m Finishes - Raw aluminium Packed - 1+
A16 - Angle One Face Fluted		A17 - Angle One Face Fluted
Sizes - 18 x 18 x 1mm Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 25 x 25 x 1mm Length - 2m Finishes - Raw aluminium Packed - 1+
A18 - Light Cope		A19 - Heavy Cope
Sizes - 18 x 6mm (inside) Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 18 x 6mm (inside) Length - 2m Finishes - Raw aluminium Packed - 1+
A20 - Fluted Flat Bar		A21 - Double Feather Edge Bar
Sizes - 37 x 3mm Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 25 x 3mm Length - 2m Finishes - Raw aluminium Packed - 1+
A22 - Cope		A23 - Bullnosed Fluted Step Nosing
Sizes - 28 x 3mm Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 43 x 17mm (O/a) Length - 2m Finishes - Raw aluminium Packed - 1+
A24 - Square Bullnosed Fluted St/Nose		A25 - 'H' Section
Sizes - 43 x 19mm (O/a) Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 30 x 11 x 7mm gap O/a Length - 2m Finishes - Raw aluminium Packed - 1+
A26 - 'H' Section		A27 - Unequal Channel
Sizes - 25x11 x 6mm gap Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 28 x 15 x 23 x 11mm Length - 2m Finishes - Raw aluminium Packed - 1+
A28 - 'H' Section		A29 - Double Channel
Sizes - 18x10 O/a x 6 gap Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 25x17 O/a x 7 gap Length - 2m Finishes - Raw aluminium Packed - 1+
A30 - Double Channel		A31 - Wallboard Section
Sizes - 25x10 O/a x 7 gap Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 3mm Length - 2m Finishes - Raw aluminium Packed - 1+
A32 - Wallboard End Stop		A33 - Wallboard External Corner
Sizes - 3mm Length - 2m Finishes - Raw aluminium Packed - 1+		Sizes - 3mm Length - 2m Finishes - Raw aluminium Packed - 1+
A34 - Fluted Half Round (Carpet trim)		A372 - Aluminium Handle Section
Sizes - 35mm Length - 2m Finishes - Raw aluminium Packed - 1+		Length - 1.8m Finishes - Bright or Anodised Packed - 1+
A557 - Aluminium Handle Section		A114A - Aluminium Handle Section
Length - 1.8m Finishes - Bright or Anodised Packed - 1+		Sizes - for 16mm board Length - 1.8m Finishes - Bright or Anodised Packed - 1+
A147 - Aluminium Handle Section		A649 - Aluminium Handle Section
Sizes - for 16mm board Length - 1.8m Finishes - Bright or Anodised Packed - 1+		Sizes - for 16mm board Length - 1.8m Finishes - Bright or Anodised Packed - 1+
ASOVEREIGN - Aluminium Han Section		A2281 - Aluminium Handle Section
Sizes - for 16mm board Length - 1.8m Finishes - Bright or Anodised Packed - 1+		Sizes - for 18mm board Length - 1.8m Finishes - Bright or Anodised Packed - 1+

Expanded Aluminium Sheet
Stocked in standard sheets, as sizes below. Also available in cut panels from min. 300 x 300mm increasing in increments of 150mm to a maximum of 2400 x 1200mm
Mesh	Sheet size (mm)	Product Code
6mm x 18g	2400 x 1200	A1196
3mm x 22g	1200 x 900	A354
3mm x 22g	1200 x 900	A54G
1.5mm x 24g	1200 x 600	A601
.75mm x 30g	600 x 7500	A901
Special cuts are priced to the nearest 150mm above

Expanded Stainless Steel
Soffit vent mesh - the ideal product for eaves ventilation of lofts, etc., no sharp edges, easily cut with scissors.
Size	Product Code
30m x 75mm	A2

Offcuts
Plain, patterned and expanded aluminium sheet in packs of varying sizes and gauges, as available.
Description	Size	Product Code
Plain and patterned	10kg (approx)	A3
Plain and patterned	20kg (approx)	A4
Expanded	32.5 sq mts.	A3E

Purpose Made Steptreads
Area is calculated to nearest 25mm above. Prices are for single bend (Square or bullnosed) and include fixing holes. (each additional bend is chargeable) For notched end. Discounts: less 10% for quantities of 10+ (same size and material) and 20% for 30+ (same size and material.
Description	Maximum Length (mm)	Product Code
Fluted pattern, Aluminium 20g	2300	A5A
Chequred pattern, Aluminium 18g	2440	A5B
Bright annealed, Stainless steel 22g	2440	A5C
Strip mill finish, Brass 22g	2000	A5D
Patterned aluminium: Stainless steel: Brass: Copper and Zinc sheets also available in cut panels

Aluminium Alloy Extruded Sections (Mill Finish)
		Angles (mm)
1.5mm	10 x 10	12.5 x 12.5	16 x 16	19 x 19	25 x 12.5	25 x 25	31 x 31	38 x 38	50 x 50
Code	A615A	A615B	A615C	A615D	A615E	A615F	A615G	A615H	A615I
3mm	12.5 x 12.5	19 x 19	25 x 12.5	25 x 19	25 x 25	31 x 12.5	31 x 19	31 x 31	38 x 38
Code	A63A	A63B	A63C	A63D	A63E	A63F	A63G	A63H	A63I
3mm	44 x 44	50 x 25	50 x 38	50 x50	63 x 63	75 x 25	75 x38	75 x50	75 x 75
Code	A63J	A63K	A63L	A63M	A63N	A63P	A63Q	A63R	A63S
		Channels (mm)
1.5mm	10x6x10	10 x 10 x 10		12.5x12.5 x 12.5		16 x 16 x 16		19 x 19 x 19
Code	A715A	A715B		A715C		A715D		A715E
3mm	12.5 x 12.5x12.5	19 x 19 x 19		25 x 25 x 25		25 x 38 x 25		25 x 50 x 25
Code	A73A	A73B		A73C		A73D		A73E
3mm	25x75x25	38 x 38 x 38		50 x 50 x 50		50 x 75 x 50
Code	A73F	A73G		A73H		A73I
		Tees (mm)
1.5mm	12.5x12.5	25 x 19		25 x 25
Code	A815A	A815B		A815C
3mm	19 x 19	25 x 25		38 x 38		50 x 25		50 x 50
Code	A83A	A83B		A83C		A83D		A83E
		Flat Bars (mm)
1.5mm	12.5	19	25		3mm	10	12.5	16	19
Code	A915A	A915B	A915C		Code	A93A	A93B	A93C	A93D
3mm	21	25	31	38	50	75	100
Code	A93E	A93F	A93G	A93H	A93I	A93J	A93K
		Half Round Mouldings (mm)
3.0mm	12.5	19	25	31	38
Code	A103A	A103B	A1035C	A103D	A103E
		Round Bars (mm)
Diameter	6	10	12.5	19	25
Code	A11A	A111B	A11C	A11D	A11E
		Tubes (mm) (e) Extruded - (s) Seam Welded
20g	6 (e)	10 (e)	12.5 (s)	16 (s)	19 (s)
Code	A1220A	A1220B	A1220C	A1220D	A1220E
16g	10 (e)	10 (s)	12.5 (s)	16 (s)	19 (s)	21 (s)	25 (s)	38 (s)	50 (s)
Code	A12A	A12B	A12C	A12D	A12E	A12F	A12G	A12H	A12I
		Square Tubes (mm) (lengths 1800mm)
16g		12.5 x 12.5 x 1.5		19 x 19		25 x 25		38 x 38
Code		A1316A		A1316B		A1316C		A1316D
10g		25 x 28		38 x 38		50 x 50
Code		A1310A		A1310B		A1310C
Other sizes available, please enquire