Particularly suited where height restriction applies, 11 mm maximum
distance between floor and base of furniture.
By changing position of the roller the distance from the floor to the
base of the furniture can vary from 11 to 9.5 mm.
Can be used for mobile pedestals that are stored under desktops
Packed: 50pcs

Ø 35 mm
With or without brake
Maximum load carrying capacity 75 kg per castor
For use with pin and mounting plate CG624A
Packed: 20pcs

For mounting castors CG624
Packed: 20pcs

Without brake or swivel
Maximum load carrying capacity between 6 kg and 17 kg
Screw fixed mounting plate and low installation height.
If mounted with ball uppermost, can be used as a conveyor system roller
Yellow chromatized steel housing with reinforced base.
Chrome-plated steel ball
Packed: 100pcs

With 38 x 38 mm mounting plate
Without brake
Maximum load carrying capacity 90 kg per castor
Suitable for soft floor coverings due to hard roller surface
Black fibreglass reinforced plastic
Packed: 20pcs

With 32 x 32 mm mounting plate.
20 x 20 mm screw hole distances.
Mat black plastic
Packed: 20pcs

With 32 x 32 mm mounting plate.
27 x 27 mm screw hole distances.
Mat black plastic
Packed: 20pcs

With 36.5 x 36.5mm mounting plate.
27 x 27 mm screw hole distances.
Mat black plastic
Packed: 20pcs

With 37 x 37 mm mounting plate
Without brake. Self-lubricating friction bearing
Sturdy metal construction, standard castors for domestic furniture
Wheels have a plastic transit cap which should be removed after mounting
Castors are handed, left hand shown, equal amounts of left and right handed castors are supplied. Polished chrome-plated zinc alloy   
Packed: 1pcs

Swivel castor
Ø 50 mm
With 36.5 x 36.5 mm mounting plate
Load carrying capacity approx 50 kg per castor
Chrome-plated zinc alloy housing with grey soft plastic wheels   
Packed: 20pcs

With 32 x 32 mm mounting plate.
27 x 27 mm screw hole distances.
Mat black plastic
Packed: 20pcs

Specification

Maximum load carrying capacity 70 kg per castor
Housing: Silver aluminium Ral 9006 coloured plastic
Wheel: Mid grey rubber
Brake: Mid grey plastic     
Packed: 1pcs

M10 x 25mm
Steel
Packed: 1pc

Must be used with product CG635
Steel
Packed: 1pc

Must be used with product CG634
Plastic
Packed: 1pc

Steel
Packed: 1pc

With four prongs
For use in mounting thread fixing castors under wooden bases
Steel
Packed: 1pc

Maximum load carrying capacity 100 kg per castor
Housing: Silver aluminium Ral 9006 coloured plastic
Wheel: Mid grey rubber
Brake: Mid grey plastic     
Packed: 1pcs

With screw on 60 x 60 mm mounting plate
With or without brake
Chromatized zinc-plated sheet steel housing with black polyamide wheel
with grey solid rubber tyre
Packed: 4pcs

With screw on 60 x 60 mm mounting plate
Without brake
Chromatized zinc-plated sheet steel housing with black polyamide wheel
with grey solid rubber tyre
Packed: 4pcs

Two enclosed ball races are fitted in the ring mount. There are
maintenance free roller bearings in the hollow steel hubs secured with
hub nuts.
Without brake
Chromatized steel bracket and wheel, solid rubber profiled tyre.
Packed: 1pc

Two enclosed ball races are fitted in the ring mount. There are
maintenance free roller bearings in the hollow steel hubs secured with
hub nuts.
Without brake
Chromatized steel bracket and wheel, solid rubber profiled tyre.
Packed: 1pc

Sizes - Large(l) or Small(s)
Finishes - NP carriage with
black wheel
Packed - 10 x set of 4