Miscellaneous hinges, hinges,

Miscellaneous Hinges

Please Click on an Image to Enlarge

HI1278 - Swing Up Flap Hinges
	For top boxes in tall cabinets. Available in pairs sprung both sides. Material: Zinc-plated steel. Packed: 1 Set
Finish	Product code
	Specification (1) - Specification (2)
Silver	HI1278S
Cream	HI1278C

HI1280 - Swing Up Flap Hinges

For top boxes or wall cabinets with aluminium framed doors.
Opening angle 75° or 90°, Adjustable spring force up to 200N
Consists of: 1 pair hinges, 2 x 1 mm spacer plates fitted on hinge,
2 x 4 mm spacer plates packed loose, Grey plastic spacer plates.
Nickel-plated steel hinge.
Packed: 1 and 25 sets

Dimensions in mm

Overlay
12

13

14

15

16

17

Crank
0.5

1.5

2.5

0.5

1.5

2.5

Spacer plate
1

1

1

4

4

4

Finish

Mounting Bracket

Overlay A

Product code

Specification (1) - Specification (2)

Nickel-plated steel

0.5mm Cranked

12 or 15mm

HI128005

Nickel-plated steel

1.5mm Cranked

13 or 16mm

HI128015

Nickel-plated steel

2.5mm Cranked

14 or 17mm

HI128025

HI1282 - Swing Up Flap Hinges
	For top boxes in tall cabinets Opening angle 110°.Set includes extra springs to allow for different. door panel weights and sizes. Consists of: 1 pair hinges with white springs fitted, 2 green springs, 2 orange springs, 1 pair trim caps. Cream-white (RAL 9001) plastic trim caps Packed: 1 set

Flap Height	Flap width (mm)
	400	500	600	700	800	900	1000	1100	1200
300mm
350mm
400mm
450mm
500mm
550mm
600mm
Where very light flaps on some dimensions are used (e.g. pine or panelled doors) the flaps may automatically move upwards from an angle of about 30° to 70°. If this is not acceptable, use the weaker (green) spring instead. The hinge may not work where very heavy flaps on some dimensions are used (e.g. MDF with a handle) as this is reaching the hinge’s limits. It will depend on e.g. the position and weight of the handle. Please always carry out a trial installation first.
Finish		Product code
		Specification (1) - Specification (2)
Galvanized/nickel steel		HI1282