Pull Out Fittings, Kitchen

56860710 - Ironfix Built-in Ironing Board
	For installation in the drawer space of most standard base cabinets • When the drawer is opened the supports automatically extend • Hinging front section permits trousers, shirts to be pulled easily over the board • Internal cabinet width required; between 362 and 500 mm • Cabinet depth; minimum 500 mm required • Complete set comprises; 2 cabinet rails, 1 collapsible ironing board support system with pre-assembled 2-part extending runners, 1 folding ironing board, 1 ironing board cover, Fixing materials, Operating and mounting instructions • White (RAL 9016) plastic-coated steel ironing board • White and grey striped cotton cover with a foam lining and an elastic gathering to ensure a good fit • Sleeve arm available;
	Ironing Board	56860710

56861700 - Sleeve Arm
	White (RAL 9016) plastic-coated steel sleeve arm • White and grey striped cotton cover with a foam lining and an elastic gathering to ensure a good fit • Replacement covers are available
	Sleeve Arm	56861700

56860916 - Replacement Cover for Sleeve Arm
	White and grey striped cotton with a foam lining and an elastic gathering to ensure a good fit
	Replacement cover	56860916

56866710 - Ironfix Wall Mounting Ironing Board
	With turning mechanism; swivel range 180° • Can be locked in left, right or inclined position • Complete set comprises; 1 wall mounting bracket, 1 folding support, 1 folding ironing board, 1 ironing board cover, Fixing materials, Operating and mounting instructions • White (RAL 9016) plastic-coated steel ironing board • White and grey striped cotton cover with a foam lining and an elastic gathering to ensure a good fit • White (RAL 9016) polystyrene covering hood
	Ironing Board	56866710

56860907 - Replacement cover
	White and grey striped cotton with a foam lining and an elastic gathering to ensure a good fit
	Replacement cover	56860907

51037220 - Steel Towel Rail
	With 2 rails • Side or top mounting, for fitting left or right within a cabinet or under a worktop • Installed length 480 mm, extension length 405 mm • Incorporating ball bearing runner
	Polished chrome-plated steel	51037220

51050929 - Aluminium Towel Rail
	With 2 rails • By adjusting the position of the mounting bar through 90° can be fitted left or right within a cabinet or under a worktop • Installed length 450 mm, extension length 345 mm • Runners have three position rollers • Please note the dimensions of these towel rails differ according to the finish required - click on line drawing for full details
	Silver	51050929
	White lacquered	51050723

50504704 - Stepfix Step Stool
	A robust but compact folding step stool for building into a kitchen • Stepfix has large steps, 200 x 300 mm covered with non slip rubber treads • 465 mm height x 405 mm width x 95 mm depth when folded • White epoxy coated steel frame with brown or grey plastic rollers, end caps and rubber treads
	White/grey	50504704
	White/brown	50504710

50504722 - Cabinet Bracket for Stepfix Step Stool
	For hanging the Stepfix step stool onto a cabinet wall or door
	White epoxy coated steel	50504722

50504419 - Plinth Bracket for Stepfix Step Stool
	With fixing plates to attach plinth panel
	Bright zinc plated steel	50504419

50558002 - Rapid Pull Out Tables
	Self supporting table • Pull out length 800 mm, installation width 561 mm • A complete assembly for installation in place of a drawer in a standard 600 mm wide base cabinet • Load bearing capacity 100 kg • Wooden assembly section and guides • Partially slatted laminated table top
	Stainless Steel	50558002
	Beech	50558302
	White/grey flecked	50558702
	Stone effect	50558502
	White/grey flecked	50558700

50422421 - Foldaway Fittings
	For holding heavier kitchen appliances • In fully extended position the shelf lies flush with the worktop • Lift up to release the locking mechanism when returning to stored position • Load bearing capacity 15 kg • For cabinet widths 350 - 600 mm. Installation width is optional between 300 mm and 568 mm as the two arms are completely separate • Swivel depth 445 mm • Maximum shelf width is internal cabinet width less 90 mm, shelf depth = 300 mm • The cranked mounting brackets prevent the door hinges fouling the shelf when raised • When mounted directly beneath the worktop the smallest remaining useable height within the cabinet is 340 mm • Galvanized steel 150N tension springs
	White lacquered steel	50422421

37252700 - Lift up Fitting
	For lifting door panels used on tall units to cover built-in electrical appliances such as microwaves and grills • The fitting consists of 2 sprung arms connected by a cross bar which also helps support and stabilise the door when being lifted • Mechanism pushes the door panel out 85 mm before lifting it up 370 mm • Suitable for 600 mm wide cabinets, installed width 565 ±7 mm • Suitable for door heights 370 - 450 mm • Grey (RAL 7040) Steel
	Cabinet width 600 x 565 mm installed width	37252700
	Cabinet width 500 x 465 mm installed width	37252701
	Cabinet width 800 x 765 mm installed width	37260903
	Cabinet width 900 x 865 mm installed width	37260904
	Cabinet width 1000 x 965 mm installed width	37260905

81893360 - Heavy Duty Wall Brackets
	Ideal for microwave ovens, heavy speakers, fish tanks, garage shelving etc. • Adjustable from 330-460 mm • 70 kg carrying capacity • One set comprises: 2 x brackets, Fixing materials
	White steel	81893360

81893300 - Television Support Wall Bracket
	Wall mounting • For 13”-16” televisions • 25 kg carrying capacity • Thumbwheel allows easy adjustment of tilt and swivel • Plastic coverplate hides all fixing screws • Fixing materials included
	White steel	81893300

Whilst every effort has been made to maintain the accuracy of the details contained within this Web-Site, Hart Wholesale reserve the right to change or amend any detail without redress. E & OE
© Copyright Hart Wholesale 2005

Hart Wholesale are premier suppliers to the hardware and manufacturing trade. We stock the full range of BLUM hinges, BLUM kitchen fittings and BLUM drawer runners including the innovative BLUMOTION also Domus ducting, ventilation and Intumescent products, together with many thousands of items of hardware including HOSPA screws, hinges, stays, brackets, bolts, hooks etc. We also stock the full range of HERA low voltage lighting and HERA custom design lighting products. Also premier supplies of Veneers and
mouldings with mirror fittings. popular lines are such as window fittings and cabinet handles with draws and drawer runners and draw
runners. Many supplies around use of manufacturing products glides or knock down fittings. primary items such as intumescent or intumisant products and rigid pvc extrusion and wardrobe fittings. other lines frequently requested are radiatror grills, but most
importantly screws and fixings and blum products with hera lighting and ducting with our range of wood vaneers and vaneered
mouldings and weather seals.